 |
Atomos has released the latest firmware update for its popular Ninja V monitor/recorder that enables ProRes RAW capture over HDMI with the Fujifilm GFX 100 and Sigma fp camera systems.
Fujifilm GFX 100
On a GFX 100 running firmware version 2.01 or later, the Ninja V can now record 12-bit 4K ProRes RAW video at up to 30p over HDMI. This marks the first time users can capture Raw footage on the large format camera.
If you don’t need the Raw video, the Atomos firmware update also enables 10-bit 422 ProRes and DNx 4K UHD (3840 x 2160) capture up to 30p or 4K DCI (4096 × 2160) at up to 24p. Multiple monitoring modes have also been added for viewing and playing back Raw footage.
 |
Sigma fp
Moving onto the Sigma fp, the Ninja V can now record 12-bit ProRes RAW at 4K DCI up to 24p or 4K UHD up to 30p over HDMI using the full width of the sensor. You can even capture 120p (119.88p) 12-bit ProRes Raw if you knock the resolution down to 1080.
10-bit ProRes 422 and DNx can also be recorded at 30p and 120p (119.88p) at 4K UHD and 1080 resolutions, respectively, if you don’t need Raw footage. Like the GFX 100, multiple monitoring modes have also been included for viewing and playing back Raw footage.
You can download the 10.53 firmware update from the Atomos Ninja V support page.
Press release:
AtomOS 10.53 — Sigma fp and FujiFilm GFX100 HDMI RAW
Important Note:
With the installation of this update if not previously activated users will be required to activate ProRes RAW, as a codec.
Following the Firmware update, when a RAW source is plugged in, or a user selects ProRes RAW Codec, a UI pop-up will ask for activation code to continue.
Visit Atomos website https://ift.tt/2YQalnq and follow the online instructions to generate a code.
SIGMA fp
• Video modes available for monitoring and recording in 12 Bit RAW: - 4096x2160p24
- 3840x2160 up to 30p
- 1920x1080p up to 119.88p
• Video modes available for monitoring and recording in 10 Bit ProRes 422 or DNx:
- 3840x2160 up to 30p
- 1920x1080 up to 119.88p
Monitoring of RAW input in:
- Native – Linear to VLog for use with 3D LUTs – can use any existing VLog LOOK LUTs
- Rec709 – to view RAW input in SDR up to 6.7 stops of dynamic range
- HLG – to view RAW in HLG with up 10.5 stops of dynamic range
- PQ – to view RAW in PQ/HDR10 with up to 10.5 stops of dynamic range, for scenes with extended spectral highlights.
• Playback of recorded video in ProRes RAW, ProRes, and DNX
FujiFilm GFX100
• RAW modes available for monitoring and recording in 12 Bit RAW
- 3840x2160 up to 30p
• Video modes available for monitoring and recording in 10 Bit ProRes 422 or DNx:
- 4096x2160 up to 24p
- 3840x2160 up to 30p
- 1920x1080 up to 60p
• Monitoring of RAW input in:
- Native – Linear to Vlog for use with 3D LUTs – can use any existing Vlog V Gmaut LOOK LUTs.
- Rec709 – to view RAW input in SDR up to 6.7 stops of dynamic range.
- HLG – to view RAW in HLG with up 10.5 stops of dynamic range.
- PQ – to view RAW in PQ/HDR10 with up to 10.5 stops of dynamic range, for scenes with extended spectral highlights.
• Playback of recorded video in ProRes RAW, ProRes 422, and DNx.
Known limitations
SIGMA fp
• In some instances when using LUTs banding artifacts may be observed in some areas of the display on the Ninja V for
4KUHD video modes. (This behaviour is only limited to the display of the Ninja V and not the recordings).
• On occasion if the camera is. powered down whilst connect to the Ninja V and set to RAW mode, the Ninja V may enter a locked state.
- Switch between Record and Play back mode, Unplugging and re-plugging the HDMI, or Power cycling Switching will all resolve this issue.
• ISO metadata reported in Final Cut Pro X may occasionally be incorrect if using 1/3 EV ISO adjustments on the camera. - Incorrect for camera ISO setting 1000, 8000, 16000.
• Update in future firmware release for camera.
- White balance adjustment is not available in Final Cut Pro X.
FujiFilm GFX100
• Interaction with the EVF eye sensor may cause freeze frame or black frames in the recording. - Not using the EVF or tilting the LCD screen can resolve the issue.
- Removal of the EVF from the camera is advised to avoid issue.
• White balance metadata is not reported in Final Cut Pro X.
- Update in future firmware release for camera and Ninja.
- White balance adjustment is not available in Final Cut Pro X.
General
• RAW to HDR HDMI output - PQ / HDR10 output conversion may appear slightly incorrect.
from Articles: Digital Photography Review (dpreview.com) https://ift.tt/3gSOcuJ
via IFTTT
0 comments: